EV charger installation
EV Charger Installation Electrician in Newton Aycliffe
Charge at home overnight for a fraction of the cost of public chargers. We check your supply first, then fit the charger where it suits your drive.
A home EV charger is a dedicated circuit from your consumer unit to a wall-mounted charge point, with protection built in for the specific risks of charging a car outdoors. Done properly, it’s a tidy, safe installation you won’t think about again.
Before anything is fitted, we check the incoming supply, main fuse rating and consumer unit. Some homes need load management so the charger reduces its output when the oven and shower are on. Then the charger is placed where the lead reaches your car’s charging port without stretching across the drive.
What we check before fitting
- Main fuse rating and total household load
- Whether the consumer unit has a spare way or needs upgrading
- Earthing arrangement and protection for the outdoor circuit
- The cable route from the board to the charger position
- Where your car parks and where its charging port sits
- Whether you want tethered or untethered, and any smart app features
How an EV charger install works
- Survey
Photos of your board, meter and drive are often enough to price it. Sometimes a quick visit is needed.
- Install
A dedicated circuit is run to the charger, usually in half a day to a day.
- Test and hand over
The circuit is tested, the charger commissioned and paired with its app, and you get your certificate.
EV charging in Newton Aycliffe
Most homes in Newton Aycliffe have a drive or off-street parking, which makes home charging easy. Older houses sometimes need a consumer unit upgrade first, and longer runs to a detached garage need a heavier cable. We’ll tell you up front if either applies.
EV charger questions
Can I have a charger if I park on the street?
A home charger needs off-street parking such as a drive. Running a cable across a public pavement isn’t allowed without permission from the council.
Which charger should I choose?
Most popular smart chargers work well. If you have a time-of-use tariff or solar panels, pick one that supports scheduling and solar matching. We’re happy to advise.
Do I need a new consumer unit?
Not always. If your board has a spare way and suitable protection, the charger can usually connect to it. If not, upgrading the board at the same time is often the neatest solution.
Getting an EV in Newton Aycliffe?
Send photos of your fuse board and drive and we can usually quote without a visit.